Thinking About Green Engineer Training - An A-Z

In a nutshell, 'Green Energy' utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered 'Green' because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV's) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun - often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic - or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household's hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit - all the way up to 2-5k for a full professional fitting.

Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and 'energy crops'. It's the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK's main green strengths - as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.

Within this field is the need for the use of 'Energy Crops', such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses - because of their yield of dry matter. Other less known materials within this field are Agricultural and Municipal Waste. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. Municipal Waste such as food or wood can also be utilised as a biomass product.

Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK - we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further - if energy efficient items such as wind turbines or solar electrical panels are used.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage - and cannot be stored. To be fair, the UK has the highest level of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Rather than electricity production running at 2-10 p per kWh, it could be run at 2p per kWh. Therefore, recovery of cost takes approximately 6-9 months overall.

Then there is Hydropower - something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.

Using a turbine, a Hydropower system can transform the energy of water into other forms. No water reservoirs are required - as the turbines either run through a water drop-off system or the natural power of the river. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as 'Micro-Hydro'. Having said that, this process could still generate 200mW of the National Capacity. When considering the installation cost of items such as this, we're looking at somewhere between 200 pounds and 3k per kW of energy created.

Because of the energy need of the Western World, we are now seeing a rapid rise in 'Green Energy'. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.

Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With 'Green Energy' rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry - but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.

(C) 2009 S. Edwards. Browse around electricianscourse.co.uk/GreenEngineerCertification.html or Renewable Energy Certification.